1.500M of control distance 2.3 Control Modes 3.Easy use for Light,Motor,Fan,Gate,Door,Lock, Window, Blind, Banne, Winch, Bell

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC 110~240V or DC 0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S1UB-AC110 / S1UB-AC220Channel: 1 CHControl Modes: Toggle, Momentary, LatchedCoding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): AC100~240V (S1UB-AC110), AC110~240V (S1UB-AC220)Working Voltage Range of Relay: AC 110~240V or DC 0~28VPCB size: 74mm x 52mm x 24mmCase size: 79mm x 58mm x 35mmMaximum Working Current: 10A

Transmitter:

Model No.: CV-6Channel: 6 CHRemote Control Distance: 500m / 1500ft (theoretically)Encode: Fixed code by solderingUnit size: 110mm x 50mm x 18mmPower Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Setting control mode Toggle: Only connect Jumper-2.Control mode Toggle: Press -> On; Press again -> Off.Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Press button 6 again: Turn off Receiver 6 (disconnect B and C, connect A and B)Setting control mode Momentary: Only connect Jumper-1.Control mode Momentary: Press and hold -> On; Release -> Off.Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press and hold button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Release button 6: Turn off Receiver 6 (disconnect B and C, connect A and B)Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.Control mode Latched: Press -> On, another relay Off; Press another button -> Off.Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)…Press button 6: Turn on Receiver 6 (connect B and C, disconnect A and B)Press other button: Turn off Receiver 6 (disconnect B and C, connect A and B)

Package Include:

6 x Receiver: S1UB-AC110 / S1UB-AC220 (1 Channel / Three Control Modes)1 x Transmitter: CV-61 x User manual