1.Karleader display solution & USA high-end chipset applied;2.Aluminum alloy structured with excellent ventilation and light body;3.Triple-image screen presetted,quad screen available by force button;4.Mirror/normal view switchable;5.Auto alarm for video loss during transmission;6.Wide range power supply for apply on both small and big vehicles.

Wire diagram:

1. 4-channel video input for front,back,left and right view cameras,dual video output;2. When the engine starts,the screen automatically switches on to display trip-image screen as per Picture 1.The display mode    retains when you drive straightly forward;3. Display mode under left-turning condition,see Picture 2;   When left-turning light is turned on,the screen enters into left-turning display mode.The display mode retains for 2.5 seconds    for driver's safety when left-turning light is off;4. Display mode under right-turning condition,see Picture 3;   When right-turning light is turned on,the screen enters into right-turning display mode.The display mode retains for 2.5 seconds        for driver's safety when right-turning light is off;5. Display mode under reversing condition,see Picture 4;6. Once force button is pressed,the system enters into quad screen mode as per Picture 5,then if it switches to left(right)turning    or reversing condition,the display mode changes accordingly and finally switches to presetted trip-image screen like Picture    1.Quad screen mode can also be cancelled by pressing force button again;7. Auto identification of the system of cameras.All cameras connected with this splitter have to be in common system,i.e.,all    PAL or all NTSC;8. Mirror /normal view switching function:If the camera in use does not come with night view,you can simply adjust the toggle    switch to correct it.There are 4 toggle switches,i.e.,1,2,3,4,each controlling the view from Right,Left,Back and Front cameras      accordingly.Please refer to the picture on right page for the toggle switches;9. Auto alarm of video loss during transmission:If there is any video loss during transmission,the buzzer automatically alarms    with 7 beeps;10.Reversing-first setting:   Under reversing condition,even you turn on left or right turning light,the screen retains reversing display mode like Picture 4,    unless you press the force button.

Monitor dispay mode: