Ads by Google
Galvanized steel stud is widely used in construction and building decoration, especially in ceiling grid system and partition stud system. Due to the advantage of easy installation and cost saving, it is widely accepted by the users.
Ceiling grid system
| Load bearing (main)joist | Roofing(secondary)Joist | ||||
Specification | 38 X 12 X 1.2 | 50 X 15 X 1.2 | 60 X 27 X 1.2 | 50 X 19 X 0.5 | 60 X 27 X 0.6 |
Remarks | Dot marking on the roofing joist can be made according to customers requirement and length can be adjusted. | ||||
Partition stud system
| Steel track | Steel stud | ||||
Specification | 38 X 12 X 1.2 | 50 X 15 X 1.2 | 60 X 27 X 1.2 | 50 X 19 X 0.5 | 60 X 27 X 0.6 |
Remarks | Dot marking on the steel stud can be made according to customers requirement and length can be adjusted. | ||||
Technical Performance
Item | Specification | Standard:GB/T11981-2001 |
Double sides galvanization mass | 120g/m2 | >=80g/m2 |
Tolerance in length | +5mm/-5mm | -10mm/+30mm |
Bend interior angle radius | 1.50-2.00mm | 1.25-2.25mm |
Angle deviation | -1°/+1° | -1.5°/+1.5° |
Flatness | Side Suface:0.3mm/m Bottom surface:0.6mm/m | 1.0mm/m 2.0mm/m |
Galvanized Steel Stud