Stainless steel powder with Fine particle size/Optimum particle size/High density, high purity/Low density,

Applying ultra-high water-atomization and restriction gas-atomization technology, AT&M can not only produce standard metal powder for PM but super-fine powder with particle size less than 10 um. The final products made from the metal powder are widely used in the industrial field like medical equipment, office equipments and consumables, automobile, hard wear, sports facility, clock and watch. . .

Characteristics

-Fine particle size                              -Optimum particle size

-High density, high purity                    -Low density, high purity

-Low oxygen content                          -Low oxygen content

-Controlled particle size distribution for MIM and Porous Products

Typical powder properties for MIM

 

Grade	Shape	S.D. (g/cm3)	T.D.  (g/cm3)	O.C PPM	Mean particle Size(μm)
					D50
316L	Spheroidal	7.6-7.9	>4.2	<3000	9~11
17-4PH	Spheroidal	7.6-7.9	>4.2	<3000	9~11
430L	Spheroidal	7.6-7.9	>4.2	<3000	9~11

Typical powder properties for porous material

 

Grade	Shape	A.D.  (g/cm3)	O.C PPM	Particle Size(mesh)
316L	Irregular	1.8-2.3	<2800	-80+150, -150+250, -250+500, -150+325 variety of particle size
304L	Irregular	1.8-2.3	<2800
430L	Irregular	1.8-2.3	<3000
410S	Irregular	1.8-2.3	<3000
904	Irregular	1.8-2.3	<3000
17-4PH	Irregular	1.8-2.3	<3000

Other alloys and tailored particle size distributions, not listed, are available on request.

Stainless steel powder