Built-in unique honeycomb net, solar air separator can remove both free air and micro bubbles from solar hot water system.

Solar air separator for solar heating systems where air bubbles and micro bubbles must be discharge from water.

Can withstand continuous temperature of -40---180 degree, max pressure is 10 bar.

While using the air vent on the solar system, it make the system operate more effectively.

The core exposes the differences

The air separators unique construction allows it not just to remove large free flowing air but also the countless micro-bubbles. Thus the air separator is able to remove dissolved gases from the water thereby conditioning it to a highly absorptive state. Air problems become a thing of the pa 

The honeycomb net in the air separator makes the difference

The honeycomb net is at the heart of the unit. It allows the air separator to deaerate the water which produces the above mentioned advantages. The honeycomb net is made from soldered copper mesh which creates a very still area of water in the air separator. Even the smallest microbubbles which enter in the main stream are given the opportunity to rise. The air collects in the air chamber before discharged through automatic valve. Floating dirt can be removed through the scum valve.

 

ADVANTAGES

Greatly reduced commissioning times ager initial fill, no more venting requiredOptimum heat transferIncreased component lifeNo oxygen based corrosion or pump cavitationQuiet operationDirty water protector

Solar air separator for Solar water heater