1.Long distance transmitter module 2.industrial control 3.good stability transceiver module 4.receive sensibility:-107dbm

  KST-RX820 two-way distant data transmit module

Technical index parameter

Operating temprature: -25°C~60°C

Operating humidity: 10%~90%(comparative humandity,without containing condensation)

Outer size:70mm(L) x 45mm(W) x 18mm(H) (containing no antena board)

Antenna tie-in mode: SMA

Modulation:FSK

Operating frequency: 428~435MHz

Trasmit power:500mW

Receive sensibility:-107dbm

Transmit current: 350mA

Receive current: 30Ma

Interface speed: 1200/2400/4800/9600/19200/Bit/s (user choice)

Interface data format: 8E1/8N1/801

Operating power: +5V/+12V (direct current)

KST-RX820

Low power transmitter,it has transceiver Instruction

1. Transmitter power is 500mW,when it work transmit ,the Pilot lamp is red ,when it work receiver ,the pilot lamp is green

2. when the frequency is ISM , it no need apply Besides

load frequency is 433MHz, if special requirements are also available for the 315/868/915MHzy

3.high anti-jmming and low wrong code

Basic on FSK modulation , adopting efficient forward error correction channel  encoding technology , improve the data ability that against burst interference and random interference.

4. high transmission ability reliable transmission distance is about 1000 meters (BER = 10-6 @ 1200Bit / S).

5, transparent data transferTo provide transparent data interface, interface baud rate is 1200/2400/4800/9600/19200Bit/s, format is  8N1/8E1/8O1 user can set. Air baud rate 1200/2400/4800/9600/19200Bit/s user settings.

6 .many channel

Standard modules provide 8 channels, to meet a variety of communication combinations for customers

7. 4 kind of interface modeModule provides four kinds of interface mode, according to the user's requirements can be defined as a standard RS-232 / TTL / RS-485/USB interfaces. 

8.large data bufferswhen the data be transmission,it will over at least transfusion 120Byte data frame, when the air is large than the baud rate serial port baud rate, at least more than one data frame transmission 200K.

9. intelligent data controlUsers do not need to communicate other control, as long as from the interface / receive data can be, other, such as air / receive switching, control operations, the module can be done automatically.

10.low power

Receiver power is 30 mA, sender power is 350mA

11.High reliability,mini-volume ,light weight

Adopting A single chip radio frequency integrated circuits and chip MCU, less external circuitry, high reliability.

 

FSK transceiver module