Installed on all conveyor loading points to eliminate material spillage and provide a positive dust seal.
This sealing system is with a low-maintenance design that provides an effective seal without the application of downward force onto the belt.
It is recommended that appropriate wear liners be installed on the inside of the chute to protect the sealing system from material side-loading forces.
The skirting is composed of a single strip rubber with an integral "outrigger" strip to form two sealing barriers.This skirting will provide dual sealing effectiveness.
The sealing strip is clamped against the metal chute wall abrove the belt.
The strip's primary leg is installed to touch the belt,forming a flexible wall to contain fugitive material.
The sealing strip's "outrigger" leg will be installed so it lies on the outside of the belt,away from the material load.
This flap form 2 ribs that form a secondary seal,to keep on the belt any particles of material that pass under the primary seal
Rubber Sealing Board for Conveyor System