Product Description & Application Jiuguang HP backlit film 210 micron is a polyester backlit film, one side is coated with a translucent matte ink-receptive layer for inkjet printing and the other side is gloss. It is suitable for indoor static backlit applications,such as light boxes at retail outlets, shopping malls, indoor stadiums, airports, subway, multiplexes,hotels & restaurants. |
| | It is recommended to acclimatise the media in the normal printing environment for 24 hours before printing. | | | While printing, care must be taken to modify the print file to suit the ink limit of the media. For best results, please ensure proper colour calibration. For further assistance, please consult our HelpDesk. | | | The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination media. | | | Printed media should be protected by a cold, UV stabilised, pressure sensitive adhesive laminate only. The prints should be thoroughly dried before lamination. The lamination media must be checked for compatibility with the media. | | | Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing. | | | The inherent nature of the polyester calls for careful handling of the media to avoid fold and kink marks. | | | A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality. | | | When not in use, the backlit film should be stored in its original packing in a vertical position. |
|