1.Plastic Automatic Feeder 2.adopts low-vacuum air-conveying technology 3.high efficiency, low noise, reliable performance  

1. Summary

The Plastic  Automatic Feederadopts low-vacuum air-conveying technology to automatically carry grains material to the hopper of the shaper. It is used with STG series hopper type dryer, injection molding machine, and extruder. If the raw material need not dry, the machine can be used separately. This makes the technique of feeding, drying finish together, greatly reduces labour strength, raise the production rate.

The Plastic  feeder can work continuously for a long time, you only turn on the switch of power, and you can start the machine, automatically finish feeding program.

In order to correctly master the operation method, extend its using life, please read carefully the operation introductions.

2. Main Technical Standards

Model		ZJ200	ZJ400	ZJ600	ZJ1000	ZJ1500
Max. Air Flow (m3/min)		2	2.8	3.4	4.5	6
Motor Power (kw)		0.75	1.5	2.2	4	7.5
Rotary speed of motor (r/min)		2800	2800	2800	2800	2900
Conveying capacity (kg/h)	5m	200	400	600	1000	1500
	10m	150	300	450	700	1000
	15m		240	360	500	700
Absorbing hopper volume (L)		10	10	25	30	48
Conveying soft pipe I.D (mm)		40	40	50	50	50
Absorbing soft pipe I.D (mm)		40	50	50	60	60
Size(mm)		520*400*905	520*400*905	620*400*970	800*530*1009	900*600*110
		370*480*820	370*480*820	392*312*655
		298*266*620	298*266*670	420*560*870	614*312*820
		298*266*640	298*266*460	392*312*510
Weight (kg)		75	90	100	130	180

3. (Remark)set conditions of conveying capacity:

1.     The used material is new line grain; its specific gravity is 0.63.

2.     Conveying vertical height does not surpass 3m.

3.     Conveying distance is 5-15m includes vertical distance 3m.

Automatic Feeder