Material :ABS
Weight:0.22KGS
Packing:Each Pcs In Color Box
C. Replacement Method of Cell:1. Receiver: The shell of the receiver is fixed with two screws. Turn the screwsin counter-clockwise direction with tools. After opening the plastic shell, a cell(type CR-2) can be found. Take out the cell, replace it with a new one and thenput back shell fixed by screws. 2. Remote controller: there is a cell cover at lower part of the back of controller,which can be opened by pushing along direction of the arrow. Take out the cell(type 23A), replace it with a new one and then put back cell cover.3. Type CR-2 cell is the exclusive high volume cell for camera, of which both 3Vand 3.6V are available. Type 23A cell is the exclusive cell for 12V remote controller.Both cells are common specialized ones which are available in supermarket,department store, and photographic studio. Indicate cell type while in purchase. 4. Service time of cell varies with difference of use situation. Electric energyin controller is consumed only when key is depressed and signal is emitted. Thusnormally service time of a cell is over one year. After power supply is on, thereceiver remains in stand-by state in which slight amount of electric energy hasto be consumed. Stand-by time of CR-2 lithium cell exceeds 500 hours. To extendreplacement cycle of a cell, when it is certain remote controlled neck ring isnot used, shut off power supply of the receiver.
Remote Control Bark Stop (TVT6009)