Ads by Google
Features: | Specification: | |||
·Apply for PCB of 8~12 cell Li-ion /Li-polymer battery pack. | ·Power consumption:80uA | |||
·No external power is need | ·Dimension(LxWxH):L51×W26×H4mm | |||
·Can connect directly to pcb/pcm via special connector on | ·Weight: 6.5g | |||
board or connect directly to output of battery pack | ||||
•5 LED display for battery pack's voltage.The voltage listed below | Warning: | |||
is base on battery during discharge.(The actual voltage might | * Please do not plug in wrong polarity | |||
vary for LED 2-4 during charging.) | otherwise the module will be completely destroyed. | |||
0%LED Flashing for singel cell voltage<3V(must recharge battery) | * The resistance potential ratio of energy display | |||
1 LED = 20% for singel cell voltage: 3.0-3.3V(battery need recharging) | module in different packs are different, | |||
2 LED = 40% for singel cell voltage: 3.3-3.5V | only use the voltage that the label nominated. | |||
3 LED = 60% for singel cell voltage: 3.5-3.8V | * Please make sure your selection is correct before you buy. | |||
4 LED = 80% for singel cell voltage: 3.8-4.1V | ||||
5 LED = 100% for singel cell voltage: 4.1-4.2V ( battery is full ) |
EDB007 8-10S LED Energy Fuel Gauge parts