Ads by Google
Specification:
high-gloss, matt, no light powder coat and fine art; red, white,blue etc. different colors are available.
Feature:
strong powder coat adhesion, hardness,flexibility,good electrical insulation,environment-friendly,recycled.
Coating Film Properties | |
| Cured film thickness | 50-70um |
| Gloss(60°) | 3-95 |
| Mpact resistance(kg.cm) | 50 |
| Cupping | 0 |
| Bending | ≤6mm |
| Surface hardness | H-2H |
| Salt spray test | Excellent |
| Acid resistance | Excellent |
| Alkali resistance | General |
powder coat Variety and Performance:
Include high light, matt, sediment ripples, art-type pattern and anti-corrosion powder with different color. Good film tough, Strong impact resistance, light color, excellent construction performance, good anti-corrosion ability and excellent insulativity.
Powder coat Application:
Suitable for all kinds of inhouse or outdoor products such as household appliances, instruments, meters medical devices, automotive components, metal furniture, fitness equipment, indoor decorative painting, etc., also apply to a variety of equipment, pipes, pipe fittings and other requirements of corrosion coating.
Powder physical properties:
Specific gravity: 1.4-1.7 (for color and gloss vary)
Particle size distribution: 100% less than 100 microns (based on the special requirements of coating adjusted)
Fluidity: 120-140
Curing condition:
Type A - 200°C (work piece temperature), 15 minutes (flat or Matt)Type B -180°C (work piece temperature), 15 minutes (highlight)
Type C -140°C (work piece temperature), 15 minutes (highlight)
Performance of film:
Inspection Item | Test Standard or Method | Test Indicator | |||
Type A | Type B,C | ||||
Impact resistance | ISO6272 | GB/T1732-1993 | 40cm | 50cm | |
Cupping test | ISO1520 | GB/T9753-1988 | 5mm | 8mm | |
Adhesion(Planning grid method) | ISO2409 | GB/T9286-1998 | Grade 0 | ||
Crook | ISO1519 | GB/T6742-1986 | 3mm | 2mm | |
Pencil hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H | ||
Salt test | ISO7253 | GB/T1771-1991 | > 500 hours | ||
Heat test | ISO6270 | GB/T1740-1979 | > 1000 hours | ||
Heat resistance | 100°C/24 hours (white) | Paul Light character (best) : | |||
Remark | 1, The above test use cold-rolled steel(thichness:0.8mm) to remove rust,oil. Film thickness: 50-70um. 2, All the indicators of film features will be down lightly depending on reducing of luster. | ||||
Spreading rate:
9-12 square meters/kg Film thickness:60um(calculate as 100% powder coating)
Storage:
kept in dry and ventilating place, the temperature is less than 25°C, and far away from heat and fire. Avoid straight sunshine, do not place open air. Under these conditions: stable storage 6 months. When over storage time, retest it, if the results meet requirement, then can still use.
.