A. )Epigranular, sharp edges, good incision performance. B. )High cleanliness, no dust. C. )High dryness. High purity

1. The garnet  is kind of Almandine Garnet. 2. The garnet is crushed from garnet rock. 3. The main application of garnet is as below: 1)Superficial treatment(Sandblasting) 2)Water-jet Cutting 3)Water filtration 4)Coated abrasive 5. The usual size are 10-20mesh, 20-30mesh, 20-40mesh, 30- 60mesh, 60grit, 80grit, 120grit, 0.25-3.35mm, 45mesh- 230mesh, W7-W50. The size could be adjusted as your require. 6. Chemical property: SiO2: 35.0-40.0% Al2O3: 16.0-22.0% FeO: 22.0-27.0% Fe2O3: 4.0-6.0% MnO: 0-2.0% CaO: 4.0-9.0% MGO: 5.0-9.0%

 

 

Grit No   Mesh    Micron        Typical application

10/20    10-20    2000-850        water filtration media   paving stone

20/40    20-40    850-425         sand blasting media, painting

30/60    30-60    600-250         sand blasting media, painting

40/60    40-60    425-250        water jet cutting abrasive suggested materials: tile, Marble,        

60/90    60-90    250-160        Granite, stone, steel grit, steel shot   

90/120   90-120   160-125      precise water jet cutting hole drilling lapping