Waterjet as a metal cutter has many advantages:
More convenient
No heat affected zone
Narrow kerf
High accuracy
Good edge finish
As we know,cutting with only water could apply in soft materials such as sponge and paper, but difficult in steel and aluminum, those metal materials cutting, mixing abrasive to waterjet and accompanying 380Mpa intensifier pump will generate stronger strength and higher speed. The auto abrasive feeder we use can supply abrasive automatically and warn you to feed abrasive when lack of it, very convenient to cut.
Technology data | |
Way of drive | AC servo |
Max moving speed | 6000mm/min |
Control accuracy | ±0.01 |
Cutting accuracy | ±0.1~±0.2 |
Power supply | 220V 50Hz |
Z-axis journey | 150mm |
X-axis servo motor | 0.75KW |
Y-axis servo motor | 0.75KW 1.0KW 1.5KW |
Z-axis step motor | 8.5Kg·cm |
X-axis max moving speed | 5000mm/min |
Y-axis max moving speed | 5000mm/min |
Z-axis max moving speed | 1500mm/min |
Electric control accuracy | ±0.01mm |
Taper | 0°~3° |
Dia. Of the orifice | 0.26mm 0.30mm |
Biggest cutting kerf | <2.5mm |
Max water discharge of orifice | 3.0L/min(300MPa) 3.7L/min(300MPa) |
Table model | 1520BA | 1525BA | 1530BA | 2040BA | 2515BA | 3040BA |
Cutting area | 1.5m×2m | 1.5m×2.5m | 1.5m×3.0m | 2.0m×4.0m | 2.5m×1.5m | 3.0m×4.0m |
Max moving speed | 6000mm/min | 6000mm/min | 6000mm/min | 6000mm/min | 6000mm/min | 6000mm/min |
Way of drive | AC servo | AC servo | AC servo | AC servo | AC servo | AC servo |
Control accuracy | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 |
Cutting accuracy | ±0.1~±0.2 | ±0.1~±0.2 | ±0.1~±0.2 | ±0.1~±0.2 | ±0.1~±0.2 | ±0.1~±0.2 |
Pump model | APW38037Z | APW38037Z | APW38037Z | APW38037Z | APW38037Z | APW38037Z |
Max working pressure | 380Mpa | 380Mpa | 380Mpa | 380Mpa | 380Mpa | 380Mpa |
Continuous operating pressure | 330MPa | 330MPa | 330MPa | 330MPa | 330MPa | 330MPa |
Power requirement | 37KW 380V/50HZ | 37KW 380V/50HZ | 37KW 380V/50HZ | 37KW 380V/50HZ | 37KW 380V/50HZ | 37KW 380V/50HZ |
Max. oil discharge | 90 L/min | 90 L/min | 90 L/min | 90 L/min | 90 L/min | 90 L/min |
Max. water discharge | 3.7L/min | 3.7L/min | 3.7L/min | 3.7L/min | 3.7L/min | 3.7L/min |
Max. diameter of orifice | 0.3mm | 0.3mm | 0.3mm |
waterjet metal cutter high quality and good price