It is for cold forming and hot forming of dish heads, as well as flanging and straightening processes for various kinds of steel

Detailed Product Description

Double action Hydraulic press is for cold forming and hot forming of dish heads, as well as flanging and straightening processes for various kinds of steel sheets. It is also used in pipe/tube fittings such as tees forming, elbows forming. The press is used in petrochemical equipment industry, and pressure vessels.

Serial YH24 series hydraulic dish head press is essential equipment for stainless, alloy steel and carbon steel dish head cold / hot forming /sizing process. There are four-column and four-beam or four-column and three-beam structures. Control is basis of the proportional control technology; the drawing slide and blank holding force are monitored and controlled by pressure sensor and proportional valves. Basis of the Flexible technology and the forming process research, the drawing force and blank holding force curve can be preset as per the actual forming process, this improves the products quality largely. The Quick die changing and clamping system can be furnished for the efficiency improving,

Serial YH24 series hydraulic dish head forming presses are the National project which demonstrates the top R&D level in this field.

 

The Main Features

* Four-column type structure is with double slide, the blankholder slide will be connected by blankholder cylinder.

* The front moveable bolster and ejector device

* Full digital control of press parameters, pressure is closed loop controlled.

* Blankholder slide pressure subsection control.

* Mould parameter storage and the failure diagnosis

* The full arrange of safety devices and safety control system

* High efficiency of cooling device, suitable for continuous production.

 

Main Technical Data

Item		Unit	YH24-400/630	YH24-1000/2000	YH24-2000/4000	YH24-3000/6000
Nominal force		kN	6300	20000	40000	60000
Blanking holding force		kN	2000	10000	20000	30000
Drawing slide area		mm	2400	3900	4500	5000
Blankholder slide area		mm	1800	2500	3200	3700
Drawing slide area		mm	850	1500	1850	2300
Blanking holding stroke		mm	400	700	850	1100
Drawing slide speed	Fast down	mm/s	150	150	150	200
	Working	mm/s	6-15	10-20	10-20	6-12
	Return	mm/s	150	100	100	150
Blankholder speed	Fast down	mm/s	100	150	150	100
	Return	mm/s	50	50	50	50
Ejector force		kN	200	500	500	630
Ejector stroke		mm	400	700	700	1200
Working table size		mm	1600*1600	2800*2800	3200*3000	4000*4000
		mm	2000*2000	3200*3200	3800*3500	4500*4500
Hole diameter to the center of blankholder slide		mm	1100	2050	2200	3200
		mm	1500	2450	2800	3600

Elbow press