Ads by Google
automatic link fence machine:
Capacity | 80-120(m2/hour) |
Wire Diameter | 2.0-4mmFeeding Wire Numbers: two |
Size of Mesh | 30x30-100X100(mm) |
Netting Width | 600-4000(mm) |
Power and Rated voltage | 9.0KW 380V,50HZ |
Dimensions | 3700*1430*1800mm 2100*1700*1250mm |
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.
Use compacting machine to make it into rolls.
.
The handle of the semi automatic chain link fence machine is simple and convience, the technical is easy to master. Cutted wire, overhanded by manual work, the mesh woven by the machine is flat, the ability is the stable and fault is little, and can be mended convenient. It is suitable for the minitype enterprise.
1.Size of package: Mainframe: Length: 1600mm width: 700mm height: 1150mm
flat roof: Length: 2000mm width: 600mm heigth: 700mm
Wire loop: Length: 2100mm width: 1400mm heigth: 850mm
2. The maximal workplace: 2000mm
The maximal width of weaving: 2000mm
3. The open aera of the weaving: 10mm*10mm----200mm*200mm
4. The maximal diameter of weaving: 4.0mm
The minimal diameter of weaving: 1.0mm
5.Power: 3KW/set 0.12KW/set
6. Otput: 20-40 m2/hour
7. Gross weigth: 1.5T
8.The cycle of production: We have merchandise on hand perennial