Ads by Google
aerosol can making machine production line
detail:
| Model | FHZ-A |
| Applicable can diameter | Φ52-105mm |
| Applicable can height | H70-250mm |
| Production capability | 80-150cans/min |
| Seam welding landing | 0.4mm 0.6mm |
| Linear rate of welding | 6-24m/min |
| Sealing point distance | 0.5-0.9mm |
| Material | Tinplate Ni plate |
| Sheet thickness | 0.16-0.3mm |
| Sheet hardness | T2-DR8 |
| Copper diameter | Φ1.38mm Φ1.5mm |
| Cooling water | 0.4 Mpa 12-18°C 20L/min |
| Compressed air | 0.5 Mpa |
| Volume of compressed air | 800L/min |
| Coating capacity | 6-30m/min |
| Coating manner | by rotaing wheel (Automatic glue-feeding) |
| Coating width | 10-14mm |
| Drying capability | 6-30m/min |
| Drying manner | Drying by electric heating |
| Size of seam welder | 1730×1695×1920mm |
| Sizoof intemal and extemal coating | 2100×650×1300mm |
| Size of drier | 9600×680×1460mm |
| Input power three-phase | AC380V 50Hz |
| Total power of the producing line | 50KVA |
| Total weight of machine set | 4600Kg |
Our major component suppliers:
1. Pneumatic elements are purchased from Japanese “SMC”
2. Hydraulic elements are purchased from Taiwan precision brand
3. Electronic control devices are purchased from “Schneider”, “Omron” and some domestic suppliers
4. Worktable surface is produced by #304 stainless steel gold plated
5. Machine surface paint is purchased from “NAVECO” car paint
aerosol can making machine production line