AAC cutting machine 1.12 moths warranty 2.Easy to operate 3.High efficiency 4.ISO9001:2008 & CE approved, 12 months warranty

AAC cutting machine with top quality in favorable price

The Working Principle of Movable Step Cutting Machine (machine moves)

Turning over sling turns the mould with 90 degree and demoulds it, the green brick together with the side board of the mould are placed on the cutting board. The vertical cutting device cuts the green brick as it moves under the drive of its motor. After completing the vertical cutting. It moves to the pause position. Cross cutting devices to the middle of the green brick pause place and then starts the cross cutting.

Main Technical Parameters of moveable step cutting machine

Serial number	Name	Unit	Index	Remarks
1	Capacity	10,000m3/year	5-15	Annual output
2	Size of the green brick	M	4×1.2×0.6	Net Size
3	Cutting cycle	mm	5/10	Vertical cutting/Cross cutting
4	cutting precision	mm	±3±1.5±1.5	Length,width,height
5	Production cycle	min/mould	5	------
6	Weight of the master cutting machine	T	12	Vertical cutting/Cross cutting
7	Motor power of the master cutting machine	KW	11.4	Including hydraulic station

The Working Principle of Fixed Step Cutting Machine (cake moves)

Turning over sling turns the mould with 90 degree and demoulds it, the green brick together with the side board of mould are placed on the cutting cart. Started by the motorm the cutting cart moves slowly through the functioning vertical cutting device to complete the vertical cutting. Then, it moves to the middle of the cross cutting cutting device and stops there, the cross cutting device is started at this moment. The cutting frame drops vertically, then after cutting the green brick horizontally, it will return to its original position.

Main Technical Parameters of fixed step cutting machine

Serial number	Name	Unit	Index	Remarks
1	Capacity	10,000m3/year	10-30	Annual output
2	Size of the green brick	M	6×1.2×0.6	Net Size
3	Cutting cycle	mm	5/10	Vertical cutting/Cross cutting
4	cutting precision	mm	±3±1.5±1.5	Length,width,height
5	Production cycle	min/mould	6	------
6	Weight of the master cutting machine	T	18	Vertical cutting/Cross cutting
7	Motor power of the master cutting machine	KW	12.9	Including hydraulic station