1. wind power sensor 2.material:aluminum alloy material 3.performance good seal,waterproof, corrosion resistant function.

FC8450 series wind-direction sensors used in the level of wind direction of wind generator, sensor  testing wind direction by a potentionmeter, internal install a displacement sensor,  the displacement and Angle (0-360'C) change converted into analog output. Measurement data can be easily access PLC, data acquisition instrument and other control system.

The external all parts of sensor completed by aluminum alloy material, and in plastic-sprayed surface, this kind of plastic is a waterproof, corrosion resistant function, internal and turn place all with the sealing performance good seal, prevent water, salt fog and  the dust. In order to be able to use in the cold, and the rain and snow climate conditions , FC8450 series wind speed sensor are installed internal electronic automatic heating system, prevent freeze for the rolling bearing and external rotating parts , when the temperature dropped to below zero, the system will automatically heating, melted the snow.

Installation: the sensors installed in installing special stents or stem, use PG21 screw holes or φ 29 hole for installation, guide the connecting cable or plug through installing hole, with PG21 screw nuts fixed. A pyramid sensor by two airfoil bolt in special φ 50 of the mast use.

FC8450 series wind-direction sensors selection wizard

Wind speed sensor type      signal output         measurement range      heating power       connection wires

FC8450-A-0020                        0......20 mA             0.5... 50 m/s                       20 W             12 m x 6 x 0, 25 mm ²

FC8450-A-0420                        4...... 20 mA            0.5... 50 m/s                        20 W             12 m x 6 x 0, 25 mm ²

FC8450-V-0010                        0...... 10 V               0.5... 50 m/s                         20 W             12 m x 6 x 0, 25 mm ²

FC8450-V-0005                        0...... 5 V                 0.5... 50 m/s                         20 W              12 m x 6 x 0, 25 mm ²

 FC8450 series wind direction sensor technology parameters

project:                               parameters

Measurement range:     0 to 360 degrees

Resolution:                      0.4 degrees

Precision:                      +/- 1degrees

Measuring principle:   Electromagnetic principle

Output current load:    Ω 500 max.

Working voltage:          12 ~ 36 V (DC24V)

Heater:                         24 V DC,  >20 W

Survival wind speed: 70 m/s(max.), 30 min

Connection mode :   12 m LiYCY6 x 0.25mm2  the cable

Signs of north:   Red , black ,yellow sign

weight:               0.95 kg ~ 1.35 kg