Ads by Google
20X-70-14160 Komatsu bucket teeth
MODEL | PART | KG | PIN | NUTS | |
PC100 | 20X-70-14160 | 2.13 |
|
|
20X-70-14160 Komatsu bucket teeth
Standard Short (bucket teeth)
Used for general excavating. Typically used on loaders and graders. Good for pry-out work, such as concrete or asphalt removal.
Standard Long(bucket teeth)
Used for general excavation, typically in sand or clay soil. The standard long tooth is the most popular of all designs and represents approximately 65% of the market consumption. Use mostly on loaders and excavators.
For20X-70-14160 Bucket teeth, at present we have 3 type material for you to choose. Most customer prefer T1, because it's both cheap and strong. We guarantee at right usage there's no breakage. T3 is our best material which is exactly made according to ESCO spec.
Mechanical Property of 20X-70-14160 Bucket teeth
Material | Hardness | V-Norch | Tensile | Elongation | Yeild |
T1 | 47-52HRC | akv>=16J | >=1499Mpa | >=3% | >=1040N/mm2 |
T2 | 48-52HRC | akv>=20J | >=1500Mpa | >=4% | >=1100N/mm2 |
T3 | 48-52HRC | akv>=20J | >=1550Mpa | >=5% | >=1150N/mm2 |
GN Bucket Teeth 20X-70-14160 leading advantage:
1. Aggressive leading edge design
2. Variety of approved tooth systems
3. More Side cutters / Wear shroud options
4. Reduced weight by the use of high abrasion resistant materials
5. More usable wear metal for longer point life
6. Slimmer profile for better penetration
7. Greater nose strength and fatigue life
8. Superior GN T3 alloys provide longer wear life and greater impact resistance
9. Two-piece system enables efficient use of wear metal and minimizes downtime
Komatsu bucket teeth 20X-70-14160