Welcome to ECOL - Join Free - Sign In
Horizontal Narrow Strip Blast Cleaning machine
Horizontal Narrow Strip Blast Cleaning machine
Supplier Info
[China Supplier]
Contact Person : Mr. Sales LuHuan
Tel : 86-510-85607793
Fax : 86-510-85607717
Product Detail
Horizontal Narrow Strip Blast Cleaning machine The machine consist of self-contained modules normally set up floor level

Horizontal Narrow Strip Blast Cleaning Systems

The machine consist of self-contained modules normally set up floor level

 

Structural features and Sub-Assemblies

1.Blast cleaning cabin made of hard manganese steel:

Four blast wheels for each module, two for the upper side and two for the underside of the strip. Rubberized rollers located at the entry and exit sides of the blast cleaning cabin serve to support the strip.

2.Abrasive removal device

After each blast cleaning cabinet, a compressed air blower serves to remove abrasive residues from the upper side of the strip and to return it to the abrasive circulation system for re-use.

3.Abrasive return and recondition system with pneumatic separator:

This serves to clean the circulating abrasive. Effective measures prevent leakage and keep the subsequent picking both compartments free from abrasive. Fresh abrasive is delivered as needed to maintain an optimal operating mix and to assure a consistently high blasting cleaning efficiency.

4.Dust extraction system

 

Operating Principle

This system is designed for longitudinal blast cleaning from 4 blast cleaning wheels at a maximum throwing speed of 78m/sec. The blast wheels are inclined to the strip plane at an angle to prevent from blasting interferences. The optimal abrasive throwing angle fully converts the installed power into descaling force, with the descaling efficiency per time unit remaining consistent, regardless of the strip width. All blast cleaning wheels can quickly and automatically be adjusted to suit a new strip program, thus assuring the best possible utilization of the blasting stream.

 

 

Narrow Strip Machines

LH-HB-4/600

Strip widths (max.mm) 

600

Blast wheels

4

Capacity per wheel (kW)

45

Abrasive throughput rate/wheel (max.kg/min)

550

Dimensions

 

Length A (mm)

5200

Width B (mm)

4500

Height C (mm)

6000

Strip entry height D above floor level (mm)

1150

Power requirement(without dust extr.)(kW)

230

Dust extraction capacity (M3/H)

10000

Horizontal Narrow Strip Blast Cleaning machine

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.