The LED display module with automatic glue encapsulating compound machine

ZH-160

A. Technical parameters

With glue scale:10:12:1, or other fixed proportion

Mixing way: dynamic mixing

Working travel: 1500 * 700 * 30 MM

Programming method: demonstration programming

Envelop dimensions: 1850 * 1220 * 1450 MM

The main pump (A pump) : 3.2 cc/turn (volume)

Attached pumps (B pump) : 1.2 cc/turn (volume)

The material storing cylinders volume: A cylinder 25 L, B cylinder 10 L.

The plastic flow: 10-40 g / 5 s

Input pressure: 0.5-0.65 Mpa (0.5-6.5 KGF/cm2)

The machine power: 600 W

The power supply voltage: AC220V +- 10%, 50 HZ

B. Operation introduction

Professional engineer is responsible for training the customer operators operation skill, programming and technology and maintenance and matters needing attention.

First use, program edits self-learning, input module spaced, line number per line length, modules, the number of each row, row of the number of modules, and later irrigation similar products just choose the the program can.

The site operation process: employees of a type of irrigation module, choose the corresponding process, will be put to the module, press the start button, the machine began to automatic encapsulating compound, after filling take module can, complete encapsulating compound.

C. Equipment glue process with the main character

1,Automatic operation, match glue, encapsulating compound integration, a machine two functions.

2,Adhesive volume set adjustable, on-demand ratio, at any time at any time with match, the matching high precision, saves the glue.

3,Simple operation, programming method is simple, easy tear open outfit, directly will A B two kind of glue in the corresponding plastic bucket respectively, encapsulating compound rubber to match, workers only press the start switch.

4,According to glue performance, A plastic material barrel with mixing unit prevent precipitation, and heating device can be mounted, B glue material barrels sealing good prevent volatile, equipped with liquid level sensing device, glue below level set when the automatic alarm, suggests adding glue.

5,Glue gun, convenient washing, A B glue mixing only out of the mixing tube gluing, in addition to the other parts are mixing tube do not need to clean. Long time no encapsulating compound only when the homework will take mixing tube, immerse to cleaning agents or immediately clean.

D. Three axis movement encapsulating compound advantage

1 simple operation: the touch screen operation; All the Chinese interface, record the parameters, display and alarm; For each product to provide corresponding fixture, worker training simple, save training time and cost of training;

2 quantity of cement accurate: all key components are imported products, high speed, accuracy in ensuring that at the same time, meet the automatic production under the conditions of high reliability requirements.

 E .Applicable products

LED photoelectricity suggests that the industry is developing rapidly, and while the traditional processing production enterprise is LED met the following bottleneck:

Mixing ratio accuracy difficult control: depend entirely on the manual operation, easy to scale deviation, stirring, not even

The production operation difficult to master: artificial irrigation is hard to control the flow, often LED lamp dirty, difficult to rub the lamp, cause of waste

Product quality consistency poor: the production process the controllable factors, the quality of each product group ups and downs, consistency is poor

Encapsulating compound speed is slow, artificial expensive, slow.

Energy-saving lamps pouring machine