Decking roll forming machine, China Suppliers and Manufacturers

Decking roll forming machine

Supplier Info

Jiangsu Huazhong Cold Bending Machinery Co., Ltd.

[China Supplier]

Contact Person : Mr. Jiang Harry

Tel : 86-510-85589687

Fax : 86-510-85589686

Product Detail

HZ-153-560 Decking forming machine Feeding width:1000mm Effective width:560mm Thickness:1.5-2.0mm Forming step:28

Deck forming machine:

IntroductionModel HZ51-240-720 series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. It best to be used as the floor of high buildings, and the cost of such floor is low.

Technical Parameters>

Material SpecThickness of Coil SheetMain Motor PowerForming SpeedHydraulic Station PowerQuantity of StandsHydraulic PressureControlling SystemIndex Error of LengthTotal WeightVoltage

: Galvanized steel sheet: 0.8 --1.2 mm: 18.5kw: 10--12m/min: 3kw: About 24 groups: 10~12Mpa: PLC: 10m/mm: About 1800kg: 380V 3 phase 60Hz or to the buyer requirement

Standard Equipment of Machine

Passive uncoilerGuiding equipmentRolling forming equipmentPressing equipmentPost-cut equipmentHydraulic stationPLC controlling deskSupporter tableSecurity cover (optional)

: 1pcs: 1set : 1set: 1set: 1set: 1pcs: 1 pcs: 2 pcs : 1set

Panel samples