Ads by Google
Function
Direct current transferred from solar energy is restored in the battery,which is utilized to power the load.
The system is equipped with 2 sets of lighting systems.It includes led bulb,wire(5m and 8 m each) with switch and E27 lamp holder.
UBS interface is fit for a wide range of mobile phones,MP3 and CD players.
The system is able to protect itself from overcharging,overdischarging,overload,short circuit.It could also show the status of residual capacityof battery.
The system is preferred for home and outdoor lighting under the circumstance that electricity is not accessible.
Operation
1.Fixed the solar panel directly to sun.2.put the plug into interface"solar".
The indicator (used to show the status of charging) is on when the battery is being charged.
The battery is fully charged when the indicator is flashing.
The battery is not being charged if the indicator is off.
How to use
1.Put the plug into the interface(OUT DC12V).
2.Screw the bulb in the E27 lamp holder.
Capacity of battery
Three indicators(showing the residual capacity of the battery) are all on if the capacity is full.
Two indicators are on if the capacity is 70% full.
One indicator is on if the capacity is 30% full.
LED bulb would work normally under the above situations.
All three indicators are off if the capacity is very low.LED bulb can not work.
Put the plug into UBS interface"OUT DC5V" if the system is used to charge mobile phone,MP3 and CD player.
The system can protect the built-in controller when the system faces overload or short circuit.It is a must to switch off the system after the load is removed.
Please switch off the system when the led bulb is not used.
Portable solar lighting system