firing system remote 1.1-36 cues firing system 2.easy to control and very convenient 3.programable and interchangeabl

New 12 cues remote firing system.   The receivers are powered by 6pcs AA batteries.  And each cue could fire 2-3pcs talon igniters or 4-5pcs e-matches.  It is powerful and perfect for talon igniters.

Instruction

This firing system is suitable for stage fireworks ,consumer fireworks and small fireworks display.

Usage

1) Put the battery into the receivers, and turn on the power switch. All the LED will light at this time. If there are some LED are very week or very stronger . It indicates that channel has problems. Please don’t use those channels.

2) Turn on the switch of the remote. Pressing the buttons one by one, the LED on the receivers will go out one by one. It means all the channels can get the signal without problem.

 

 

3) Connecting the igniters into the Red/black clips, the testing lamps go out, it means the igniters are connecting well.

4) Make sure the remote are stop working(turn off the remote if it has the power switch). After you leave the fireworks longer than 1 M , please turn on the receiver switch.

 

 

5)Keep the distance at least 30 meters away from the fireworks, and then you could press the remote button .

 

 

MYF-A Remote fireworks consoles