led rgb 16pixels tube Freature
1.We use SMD RGB 5050 on our tubes to ensure clear and pleasant light beam.
2.We make waterproof solution both on PCB and heads of tube to ensure IP67.
3.With Ledwalker controller and software, it can achieve color fading, skipping, Scanning, chasing, and play flash and video, etc.
4.After installation, the DMX addresses can be set automatically, solving the trouble of setting DMX address manually in a project.
5.Energy-saving, low-cost of maintenance, and long service life.
6.line extend on the side of the tube, and make sure there is no gap on the top of each tube.
7.Very slim body with size 100*28*35mm
led digital tube lamp parameter
Parameters | Description | ||
Color Range | 16.7 million additive RGB colors; continuously variable intensity | ||
LED QTY | 32pcs or 48pcs SMD RGB 5050 | ||
Pixel QTY | 16pixels per meter | ||
Operating Voltage | DC12V | ||
Control Mode | DMX | ||
Power | <12W | ||
LED Source Life | 50,000hours,based on LED manufacturers’ test data | ||
Housing | Milky, half clear or clear | ||
Temperature | -4°F to 122°F(-20°C to 50°C) operating temperature | ||
Humidity Range | 0 to 95% non-condensing | ||
Protection | IP65 | ||
Net Weight | 920g |
led rgb 16pixels tube,dmx protocol,outdoor and indoor used