Ads by Google
Designed for: Explosive atmosphere Zone 1, Zone 2 |
Combustible dust Zone 20, Zone 21, Zone 22 |
Designed for: Groups IIA,IIB,IIC |
Temperature classes T1~T6 |
High brightness module LED light sources |
Designed for petroleum, storage, chemistry, medicine, military and military facilities etc. site with potential explosive atmosphere |
Enclosure is die casted of aluminum alloy, high voltage electrostatic powder coated after shot blasted. |
Thread , spigot and cementing explosion proof structure with good explosion proof performance |
LED mounting base is of heat high conducting material can absorb and conduct LED produced heat |
Reflector is pressured of aluminum sheet with anodized surface. connect with heat conducting base via heat conducting silicon to enlarge the heat conducting area |
Integral structure, fully separated electric compartment and lighting sources compartment, prefer heat conducting design the circuit boards work under normal status to prolong lighting service life and reliable application |
Special designed constant current supply with low power consumption, protections of open circuit, short circuit, over heat etc. to ensure LED reliable work |
Optimized photometric design, with high purity aluminum anodized reflector with high reflecting efficiency to enhance lighting efficiency |
Cable entries of double clamping sealing structure to ensure explosion protection and ingress protection property |
Toughened glass cover and enclosure is cemented by epoxy resin with special process |
Special design seal structure to ensure ingress protection degree IP66 |
Exposed fasteners are of high corrosion resistance stainless steel material |
G3/4 steel conduit wiring |
Compliance with: GB 3836.1,GB 3836.2,GB 12476.1,IEC60079-0,IEC60079-1,IEC 61241-1-1 |
Explosion protection: ExdIICT6/DIPA20TA, T6 |
Rated voltage: AC 100~270V |
Light sources: LED |
Lighting efficiency: 90lm/W |
Rated power:20W,30W,40W |
Power factor:0.95 |
Color temperatire: 5500K |
Color rendering: Ra70 |
Ingress protection: IP66 |
Corrosion resistance: WF1 |
Cable entries specification:G3/4 |
Cable’s outer diameter: Φ9mm~Φ14mm |
:
: