Service life:1X108 times Control the burner ignition and flame monitoring; Power supply: 220V Power: 18VA+25VA

IFT458 controller (internal transformer)

IFT458 is applied to start ignition directly, burner monitor, control burner with combustion air or atmospheric burner(single valve control) and other systems without flush or flush controlled by other controllers.

1.Control ignition of burner for any power

2.Ionizing or UV monitoring

3.Ignition and monitor may share an electrode

4.Lock and alarm if the flame goes out.

5.Terminal of fire wire and zero wire cannot be exchanged

6.Two sets output terminals for normal and fault

7.Tested and certificated according to EC Directive90/396/EEC and European gas application standard EN298

8.It will be best that spark plug wire is shorter than 1m.

10.Reset only when alarm lamp is on.

11.Degree of protection: IP40, according to IEC529

12.Fuse: 3.15A, slow-melted H type according to IEC127-2/5

13.Environment temperature: -20°C - +60°C, without condensing

14.Current output: maximum 2A for each, 2.5A in total

Ignition Controller