Ads by Google
1. The LED test & demo case with good aluminum platesto protect the cabinet frame, the corner of the carton using stainless steel edge to anti-hit and to be firm extremely.
2. Lamp with one-on-one control switch, safe and convenient.
3. A stored box on the right to put cables, small tools or accessories.
4. two wheels makes very easy to carry.
5. Input voltage, current, active power, power factor, Frequency, annual power consumption, DC-power, contrasted
displaying 7 parameters on the meter green during testing.
6.The parameters are clear to display on the meter green , so saving-energy how it is at a glance.
Details for this LED test case:
1. The case internal circuit: strictly distinguish for AC and DC; AC socket (- AC) interface can test the electric parameters are as follows: voltage, current, power, power factor, annual power consumption (10 hours /per day ) and frequency; DC (- DC) part of the parameter display: DC lamp holder (- DC) interface data displayed in the DC POWER , such as MR16. Dc voltage in the box internal is transformed into 12 v output to light sit interface.
2. Recognized lamp holder: all socket interface has a corresponding-marked name for the user to distinguish and identify; All sockets have one-on-one control switch, convenient control and test. Dc voltage in the box internal is transformed into 12 v output to light sit interface.
3.The parameters are divided A and B zone, very clear to display on the meter screen , so saving-energy how it is at a glance.
4. Testing demo contrast: between 60cm traditional lamps and LED lighting, or contrast from different LED lights made from different manufacturers. Load sockets : MR16,GU10,E14,E17.E26/27,E40,T8,GU5.3.G24,B22 ,etc, all sockets can be customized. Parameters can be tested (voltage, current, power, power factor, annual current consumption )
5.Design for dimmable: Dimmable engine and Dimmable switch; there are two positions for dimmable switch-DIMMBALE and NON-DIMMABLE. When put the switch on dimmable position, the brightness for all dimmable lamps can be adjusted. When put the switch on Non-dimmable position, all the dimmable lamps can’t be adjusted. So it can be tested that if the brightness of the lamp can be adjusted.
6.One storehouse is for small things; 3 foundation plates are to protect the case; a pull rode is convenient for moving.
7.three wire clamps (2 PCS AC output and DC 12 output) and one AC output universal socket. It’s convenient for external power source. Every lamp socket has a unique switch and markwhich is convenient for identification and control.
8. Movable: A expandable handle or two wheels makes the case very easy to carry. Processional design , beautiful and ingenious..
AC Meter Instruction from this LED test Case
1, AC voltage Parameter:Input voltage can be displayed; support international use; voltage ranges from 86~264V. Overseas voltage can be shown for overseas use.
2, AC current parameter: Input Current can be displayed. The measurement for current is accurate to mA. The accuracy is about 1/1000.the measuring range is 4A.
3, AC Power parameter:AC power display area: Power can be displayed. Power meter is correct to 1 decimal point. So, it can show the change and contrast of power correctly. The ultimate power is 999.9w. If it surpasses 999.9, it will be showed as HHHHH.
4, Power Factor(PF) parameter:LED power factor can be displayed. (PF is a very important parameter for LED; power factor for traditional lamp is only 1)
5, Annual Power consumption parameter :Annual power consumption display area: Annual power consumption can be displayed (ten hours power on per day)
6, Frequency parameter:Frequency display area: The frequency for relative state grid can be showed. Some frequency abroad is 60Hz.
7, DC Power parameter: The power of the DC12V lamp can be showed.
Notes: Wiring must be connected as shown below method, otherwise, it may cause damage to the tester.
Wiring:
1,2 connect to DC9V~25V for testers power,
3,4 connect to Load supply voltage,
5,6 connect to load.
Voltage range between 1 and 2 is DC9V~25V,
Voltage range between 3 and 4 is DC2V~36V.
TAnnual Power Consumption setting:
S1 configuration | ||
1 | 2 | Annual Power Consumption calculation |
OFF | OFF | 8 hours per day |
ON | OFF | 10 hours per day |
OFF | ON | 12 hours per day |
ON | ON | 24 hours per day |
Packing instruction
Packing: Paper Cartons,with EPE foam holders inside,suitable for international transportation.
Product size:L48*W36*H6 (Unit: cm)
CTN size:L54*W42*H1O
Net weight:4KG
Gross weight:7KG
Volume weight:L54*W42*H12/5000
Attachments: power cable x 1pc, outer cable 1pc, fuse x 3pcs,User Manual x 1pc,
Warranty card x 1pc