1. Wireless safe operation 2. 2000m Long distance 3. used for 6 lights at least 4. One remote easy control 5. Widely used

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Use ULN2003 to drive relay, with strong anti-interference.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 315MHz / 433MHzWorking distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:

Model No.: S6C-AC220-ANT2 Channel: 6 CH6 Control Modes: Latched, Momentary, Toggle, Momentary + Toggle, Momentary + LatchedCoding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): AC100~240V Working Voltage Range of Relay: AC110~240V or DC0~28VPCB Size: 94mm x 73mm x 20mmCase Size: 100mm x 80mm x 30mmStatic Current: ≤6mAMaximum Working Current: 10A / each channel

External Extend Antenna:

Frequency Range: 300~450MHzImpedance: 50ΩAntenna Length: 15cmCable Length: 150cmWeight: 35gAnti-interference, waterproof, shielded wire set insideMagnetic stand design for easy to install

 

Transmitter:

Model No.: CB-6Channel: 6 CHRemote Control Distance: 1000m / 3000ft (theoretically)Encode: Fixed code by solderingUnit Size: 135mm x 42mm x 25mmPower Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Usage:

1) Learning Toggle control mode: When the receiver is in the status of LEARNING, press button 1 of the remote control.Control mode Toggle (Channel 1~6): Press -> On; Press again -> Off.Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)Press button 1 again: Turn off relay 1 (disconnect B and C, connect A and B)…Press button 6: Turn on relay 6 (connect B and C, disconnect A and B)Press button 6 again: Turn off relay 6 (disconnect B and C, connect A and B)2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button 2 of the remote control.Control mode Momentary (Channel 1~6): Press and hold -> On; Release -> Off.Press and hold button 1: Turn on relay 1 (connect B and C, disconnect A and B)Release button 1: Turn off relay 1 (disconnect B and C, connect A and B)…Press and hold button 6: Turn on relay 6 (connect B and C, disconnect A and B)Release button 6: Turn off relay 6 (disconnect B and C, connect A and B)3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button 3 of the remote control.Control mode Latched (Channel 1~8): Press -> On, other relays Off; Press other button -> Off.Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)Turn off other relay (disconnect B and C, connect A and B)…Press button 6: Turn on relay 6 (connect B and C, disconnect A and B)Turn off other relay (disconnect B and C, connect A and B)4) Learning Momentary (Channel 1~3) + Toggle (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button 4 of the remote control.5) Learning Momentary (Channel 1~3) + Latched (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button 5 of the remote control.6) Learning Toggle control mode (Channel 1~4) + All On / Off (Channel 5/6): When the receiver is in the status of LEARNING, press button 6 of the remote control. Press button 5: Turn on all 6 relaysPress button 6: Turn off all 6 relays