Labrotary Equipment
Impact Mill
- Beater Φ180mm
- Motor 1.5kw
- Product Size 40 mesh~120 mesh
- Output/hour 500g~5000g
- Output/hour 820X650X930mm
-Suitable for mineral, chemicals, food, health care product, herb, etc.
MZ03 Vibration Mill
- Output/hour 3L
- Motor 0.37kw
- Product size 100 mesh ~1250 mesh
- Filling Volume 1L
- Output/hour 500g~1000g
- Dimension (LxWxH) 600X350X400mm
-Suitable for mineral, chemicals, food, health care product, herb, etc.
MQW03 Jet Mill
- Compressed Air Volume 3m3/min, Air Pressure 0.8Mpa
- Total Power 25kw
- Classifier Wheel Φ60mm
- Three Supersonic Nozzles
- Product Size 325 mesh~6250 mesh (D50:1~45um)
- Output/Hour 500g~5000g
- Dimension (LxWxH) 1580X920X1470mm
-Suitable for mineral, chemicals, food, health care product, herb, etc.
MQP02 Jet Mill
- Compressed Air Flow :1.5m, Air Pressure 0.8MPa3
- Motor :11kw
- Product Size: : adjustable between d50: 1micron and 10micron
- Output :0.5~5kg/h
- No rotating part, no dead angle, easy cleaning
- Dimension (LxWxH) :50mmX30mmX40mm
MQP01 Jet Mill
- Throughput :0.5~300g/h
- Air Consumption :0.5/min3
- Power :5.5KW
- Dimension (LxWxH) ):500×350×400(mm)
-Fineness: adjustable between d50: 2micron and 15micron
-Suitable for medicine, mineral, chemical, fine material, noble metal, etc.
FW120 Classifier
- Throughput :500g~5000g/h
- Motor :3KW
- Dimension (LxWxH) :2500×1000×1600(mm)
- Fineness: adjustable between d50: 2micron and 15micron
-Suitable for medicine, mineral, chemical, fine material, noble metal, etc.
FS03 Jet Classifier
-Very precise big particle separating function
-High classifying precision of ultrafine powder
-Use COANDA principle
-Simple structure, no rotating part, low production cost (no rotating part, no motor)
-We can get coarse, medium and fine particle at the same time
-Especially good for powder classifying of narrow particle size distribution.
-It has better advantage when to classify powder with bad flow-ability and with irregular particle shapes.
- Suitable for toner, cerium oxide, alumina, aluminium hydroxide, metal powder, etc.
MGS High-speed Mill
This mill has small space occupation, compact structure, low noise, high fineness (most herb 50-300mesh), no waste, no dust emission during milling, no vibration, and can grind all animal material, plant material and minerals (including pseudo-ginseng, hippocampus, arrowhead mountain, donkey-hide gelatin, frankincense, which can not be milled by traditional mills), and at the same time, it is very good at powder milling herb, medicine, mineral, food, coal and chemical raw material, high production efficiency, and is the best choice for drugstore, hospital, institute, laboratory and family.
Labrotory equipment for milling and grinding or classifying