1.e-glass fiberglass chopped strand mat 300 2.Low fuzz ,dirt ,impurity and other stains 3.Fast wet-out 4.Even thickness

E,C Specification		Weightg/m2	Breaking strengthN/150mm	Speed ofimpregnation≤S	Packageweightkg	Flexible strengthGB1449-83 Mpa		Bindercontent%
						Standard	Wet
EMC100		100	30	60	20	123	103	6-20
E	MC200	200	30	180	30	123	103	2-6
C					60
E	MC300	300	43	180	30	123	103	2-6
C					60
E	MC450	450	60	180	30	123	103	2-6
C					60
E	MC600	600	80	180	30	123	103	2-6
C					60
All data,statement and recommendations made herein are based upon information we believe to be reliable but are made without any representation or guarantee or warranty of accuracy and are made with reservation of all patent rights Our products are sold on the condition that the user himself will evaluate them  as well as our formulae and recommendation to determine their suitability for his own purpose before adoption

Introduction

Fiberglass chopped strand mat ( e-glass fiberglass chopped strand mat 300 )is a non-woven E-or C-glass fiber mat, product manufactured by spreading continuous filament roving of 50mm in length randomly and uniformly in combination with polyester binder in powder form (or other binder in emulsion from). This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the applications of hand lay-up FRP moldings, such as various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.

Function

Fiberglass chopped strand mat is chopped using the E chopped glass and emulsion adhesive bond. It is suitable for hand lay and can enhance the unsaturated polyester resins.

Storage Methods

Products should be stocked in a dry cool offices, if not needed, do not open the packaging or packaging truss mouth, so as not to damp.

Features

1.Fibers and binder distributed equally, non-hairiness, strains and other defects debris;

2.Products with higher mechanical strength, wet strength retention of the high rate of dry;

3.Laminates smooth surface, good light transmission;

4.Moderate hardness, easy to completely saturated, loss bubble products quickly saturated;

5.The mechanical properities with good filling and review mode, and applicable to the products of complex shape forming;

6.Resin saturated last, good review mode, easy to eliminate air bubbles;

7.High tensile strength, reducing the occurrence of tearing production;

8. Uniform thickness, no defects such as stains debris;

9.Speed, good technology and good erosion-resistant fiber;

10. Good mechanical capability.