Ads by Google
1.Usage:
Used for laminating sponge with nap textiles, cloth, non-woven products and decorative materials.2.Features:
The sponge is adopted as the bonding material. After melted by high temperature ejected by the flame, the sponge is laminated with other materials, or it can be used to bond other two kinds of materials after it is burnt and melt. It is especially applicable to the lamination of nap and tiger fur nap etc., with such advantages as strong integrity, good hand sense, resistance to water cleaning and dry washing, etc.Equipped with winding, feeding, automatic alignment device, suitable for mass production; constant tension suspension cooling system will ensure the laminating quality.3.Main configuration:
Material rack: mainly used to put the sponge.Transmission shaft: mainly used to hold the sponge and prevent sponges from swaying.Flame row: mainly used to spray the flame, the flame size can be adjusted by the regulator.Poison emission system: basically to let the smoke and poisonous gas from the sponge burning out to the outside.Distribution shaft: mainly used when the material comes out from the flame row and before being laminated with cloth, to prevent materials from wrinkling.Material rack: mainly used to put the cloth to be laminated with the sponge or other materials.Transmission shaft, pedals: basically to make the operation easy and put the cloth.Water cooling roller: mainly used for cooling laminating materials.Meter counter: mainly used to count the laminating materials.Friction winding: mainly used for the laminating material winding, with two rollers to wind together in the reverse direction of the laminating material, so the laminating material can be winded tightly, neatly and conveniently.Stepless speed regulator: mainly used for the synchronization coordination between the two transmission system.Inverter: mainly used to control the whole machine speed.Control cabinet: mainly used for the operation of the whole machine power switch.4.Specifications:
Model | EMH-003 |
Power | Three phase four wire (three Fire Wires with one Neutral Wire) 380V, 50HZ |
Working speed | 600-1800m/h |
Laminating thickness | 2-10mm |
Continuous working time | No limit |
Flame row effective width | 2000mm |
Motor power | 8w |
Overall dimensions(L×W×H) | 4500mm×3100mm×2400mm (assembly height is 2700 mm) |
Weight | 4.35T |
flame complex machine