Details:
With the heat pipe and the aluminum fins, the solar water heater can get the energy quickly and have a high effiency.
The advantage is when one vacuum tube is broken,it still can work as normal.This doesn't effect the whole system.
This system can be used for seperated pressure solar water heater.
Insulation:35mm polyurethane foam and 25mm aluminum silicate
support material:2.75mm aluminum alloy
solar collector:three target tube(Cu/SS-coating)
superconducting heat pipe:High-purity copper system
style:15/20/24/30 tubes
Work station:instrument,expansion vessel,circulating pump,relife valve
Model: JJR-SFCY-01(one copper coil) JJR-SFCY-02(double copper coil)
Cubage: 100L,150L,200L,250L,300L,400L,500L
Heat collector working temperture: -35-200
Electrical heater: 45-65
hotwater temperature: 50-75
Pressure-endure ability:0.6Mpa
The advantage of the product:
It can use for the slope and plate roof house.
Uses in the extremely cold area,It still can work in - 35 degree low temperature,and the heat pipe work as normal operation,the tube cant explode.
Fixing on the western-style construction roof,looked very perfectiy.
The collector may install in the balcony, solved the high-rise construction space crisis.
Automatic control system, water tank bringing electric heating, even if the cold winter also has the hot water.
the water tank put in the room, reduced the pressure for the roof. simultaneously the water tank in indoor does not ice up.
under the low temperature, the system efficiency be higher than the ordinary solar energy.
The whole system bear pressure working,and the water comes out convenience
Also It can be used in the indoor heating, connectting he radiator or the coal gas heating as auxiliary Thus it can realise the light, the electricity and the gas three-in-one
High quality solar water heater parts 3 Target Evacuated Tube