Stampabilities DIY 3D Heat Embossing Stamping Tool GunFeatures of a Craft Heat Gun:A craft heat gun has some key features:1.Designed to have a gentle stream of hot air so as not to blow the embossing powder around.2.Has a small, defined airflow ensuring that hot air is well targeted. This avoids other areas of the paper or card getting heated unnecessarily.3.Specifically designed to be repeatedly switched on and off for several small projects.4.Will not scorch the paper or card.Tips for Using a Heat Gun:With care, a heat gun can give years of use.1.Do not block the air vents during use; this may cause the heat gun to over heat and this result in the fan and/or elements burning out.2.Do not hold the heat gun too close to the work as this can result in over heating the embossing powder and, if the hot air is forced back into the gun, may damage the heat gun.3.The nozzle of the gun will get extremely hot. Handle with care and leave the gun somewhere safe and on a heatproof surface while cooling.4.Keep a heat gun out of the reach of children and pets, particularly when plugged into a power supply.Note: A heat gun should not be used by children.Package included:1.Heat gun x 12.Embossing Powder x 2 (Silver & Gold)3.Clear Pigment Based Ink PadSpecification: AC 230V 50Hz 300W Please note: This tool requires the use of 220 Volts AC electricity only. Using a differentvoltage will damage the tool. If you live in an area that does not provide 220-230 Volts AC,then a voltage transformer is needed to convert your power supply.

Stampabilities DIY 3D Heat Embossing Stamping Tool Gun