Ads by Google
Wire wound strainer performance table:
Nominal(μm) | 0.5 | 0.8 | 1 | 3 | 5 | 10 | 20 | 30 | 50 | 80 | 100 | |
Original(μm) | 3-8 | 5-10 | 10-20 | 20-30 | 25-40 | 30-50 | 35-60 | 40-70 | 55-80 | 65-90 | 80-120 | |
Contaminant capacity(α) | 65 | 70 | 75 | 77.5 | 80 | 82.5 | 85 | 90 | 135 | 160 | 175 | |
Water flow rate(L/min) | 6 | 12 | 15 | 20 | 25 | 30 | 32 | 36 | 40 | 45 | 50 | |
Oil flow rate | 20cst | 1.2 | 1.4 | 1.7 | 3.2 | 4.6 | 5.9 | 10 | 20 | 22 | 26 | 27 |
30cst | 1.0 | 1.2 | 1.5 | 2.0 | 2.3 | 5.0 | 11 | 14 | 18 | 22 | 25 | |
60cst | 0.67 | 0.8 | 1.0 | 1.3 | 2.0 | 2.3 | 2.0 | 8.0 | 40 | 13 | 15 | |
120cst | 0.42 | 0.5 | 0.6 | 0.8 | 1.1 | 1.5 | 4.0 | 4.5 | 5.1 | 6.5 | 7.4 | |
Notes:The above table is the water flow rate of PP filter element under the 0.015Mpa,the length 250mm, Cotton wool fiber×0.6, Polyacrylonitrile fiber×1.3.
Series Code | Filter Length | Filter Accuracy(μm) | Filter Layer | Skeleton materials | inside diameter |
XRL
XRLT |
250mm
500mm
750mm
1000mm
1750mm | 0.5 0.8 1.0 3.0 5.0 10 20 30 50 80 100 |
P: Polypropylene
M: Absorbent cotton
B: Fiberglass |
J:Stainless steel frame(NO marked as a polypropylene skeleton |
OD:28
OD:30 |