Material: Silicon Carbide Max operating Temp.: 1500 C Aperture:10-60 PPI Porosity:80-90% Application: Iron and its alloys

SIC Ceramic Foam Filters are widely used for molten iron and its alloys filtration in ferrous foundries, they are also applied as gas and dust absorbing media in air-cleaning engineering.

We can offer various shapes,such as square, round and custom geometric shapes. Sizes from 10mm up to 600mm, and thicknesses from 10-50mm. The most common porosities are 10ppi, 20ppi, 30ppi, 40ppi, 50ppi, 60ppi. we also can be customized as per client's requirements.

1.Technical data of SiC ceramic foam filter:

Material	Silicon Carbide
Colour	Grey-black
Applied temperature	≤1500 º C
Pore Size	10-60PPI
Porosity	80-90%
Bulk Density	0.45-0.65g/cm3
Compressive Strength	≥1.0Mpa
Application	Molten Cuprum, Iron and Alloy

2.Chemical composition of SiC ceramic foam filters:

Chemical Composition	Content
SiC	≥70.00%
Al2O3	≤25.00%
Other	≤5%

3.Large size of Sillicon carbide ceramic foam filter:

Aperture	Size
	Length×Width×Thickness	Diameter×Thickness
10 PPI/20 PPI	200×200×50 mm	Ø200×50 mm
10 PPI/20 PPI	250×250×50 mm	Ø250×50 mm
10 PPI/20 PPI	300×300×50 mm	Ø300×50 mm
10 PPI/20 PPI	350×350×50 mm	Ø350×50 mm
10 PPI/20 PPI	400×400×50 mm	Ø400×50 mm
10 PPI/20 PPI	450×450×50 mm	Ø450×50 mm
10 PPI/20 PPI	500×500×50 mm	Ø500×50 mm
10 PPI/20 PPI	550×550×50 mm	Ø550×50 mm
10 PPI/20 PPI	580×580×50 mm	Ø580×50 mm

Note:we can be customized as per client's requirements.

SiC ceramic foam filter for iron foundry