PES Filter Cartridge
Product Introduction
The PES cartridge is ideally suitable for critical prefiltration in sterilizing applications, and for final filtration is a broad range of demanding non-sterile and application. The inherently hydrophilic membrane contains no surfactants or wetting agents, and thus results in good filtration and flow volume. Due to its wide range of PH values and lower adhesives to protein than nylon membrane, it has become the first-chosen cartridge for final filtration in pharmaceutical, food and chemical industries.
Specifications and technical parameters
Filter medium: hydrophily nylon membrane
Support layer: PP
Filter cage: PP
Pore size: 0.2,0.45,0.65,1 µm
Length: 5",10",20",30",40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area: ≥0.6 m2/10"
Diameter: 69.0 mm
Max. operating temperature: 60°C,0.2 MPa
Max. positive pressure: 0.42 MPa(25°C)
Max. back pressure: 0.21 MPa(25°C)
Sterilizing temperature: 121°C 30 min
Others: special requirement of diameter and end caps can be customized
Typical Applications:
Electronic industry: filtration for electron, micro-electronics, semiconductor industry water
Medicine industry: filtration for sterile raw material pharmacy, medical liquid degerming, solvent medical liquid
Chemical industry: filtration for organic solvent, chemical reagent, high-purity chemicals
Food industry: beer, beverage, mineral water
Pure water flow rate reference table: the initial value of 10’’cartridge L/min
(P=0.01MPa, 1cP, 25°C)
Micro rating (um) | 0.2 | 0.45 | 0.65 | 1 |
Flow rate (L/min) | 7 | 15 | 22 | 31 |