high voltage insulation sleeves
1.Non-Alkali Fiberglass Braided with silicone resin 2.Breakdown Voltage:7000V 3.Working Temperature:200C 4.UL-1441 VW-1
high voltage insulation sleeves
STRUCTURE DND USAGE:
The Fiberglass Sleeving Coated Silicone Resinof the SB-SGS-70 is Non-Alkali Fiberglass Braided then coated with silicone resin and treated in high temperature
With its good dielectric strength, flexibility and flame retarding properties make it high
performance qualities. It can be widely used in insulated or partially insulated conductors,
bus bars, component leads, or assemblies of electrical components etc.
SPECIFICATION:
DIMENSION:
INSIDE DIAMETER (mm) | WALL THICKNESS MINIMUM/MM | |
NOMINAL | TOLERANCE | |
0.5mm | +0.2, -0.1 | ≥0.37mm |
1.0mm | +0.2, -0.1 | ≥0.37mm |
1.5mm | +0.2, -0.1 | ≥0.37mm |
2.0mm | +0.2, -0.1 | ≥0.37mm |
2.5mm | +0.3, -0.1. | ≥0.42mm |
3.0mm | +0.3, -0.1. | ≥0.42mm |
4.0mm | +0.3, -0.1 | ≥0.42mm |
4.5mm | +0.3, -0.1 | ≥0.51mm |
5.0mm | +0.3, -0.1 | ≥0.51mm |
6.0mm | +0.3, -0.1 | ≥0.51mm |
7.0mm | +0.3, -0.1 | ≥0.56mm |
8.0mm | +0.3, -0.1 | ≥0.56mm |
9.0mm | +0.3, -0..1 | ≥0.66mm |
10.0mm | +0.3, -0..1 | ≥0.66mm |
12.0mm | +1.0, -1.0 | ≥0.66mm |
14.0mm | +1.0, -1.0 | ≥0.66mm |
16.0mm | +1.0, -1.0 | ≥0.66mm |
18.0mm | +1.0, -1.0 | ≥0.66mm |
20.0mm | +1.0, -1.0 | ≥0.76mm |
25.0mm | +1.0, -1.0 | ≥0.76mm |
30.0mm | +1.0, -1.0 | ≥0.76mm |
Any comments will be appreciated. FREE SAMPLES will be send for your evaluation.
Call me or email to me. I will offer the best price to you.
silicone rubber insulation sleeves FACTORY