Multiaxials fabrics is non-crimp, multi-axis and multi-layered reinforcements
Multiaxials fabrics is non-crimp, multi-axis and multi-layered reinforcements. Layer count, orientation, weight and fiber content of the layers vary based on product line and application. The layers are stitched via polyester yarn. Fabrics can be produced using multiple axis(0°,90 °,+45°,-45°),or combined with chopped mat and multiple layers of veil and/or non-woven materials. The typical application of this kind of products are wind energy,marine/ship building, recreation/leisure products, automotive, aerospace & defense etc.
PRODUCT CODE | 0 | 90 | +45 | -45 | STITCH YARN | MAT | TOTAL WEIGHT G/M2 |
BX300 | - | - | 153 | 153 | 8 | - | 314 |
BX400 | - | - | 200 | 200 | 8 | - | 408 |
BXM400/225 | - | - | 200 | 200 | 8 | 225 | 633 |
BX450LD | 3 | 3 | 214 | 214 | 8 | - | 437 |
BX600 | - | - | 301 | 301 | 8 | - | 609 |
BX600HD | - | - | 301 | 301 | 8 | - | 609 |
BXM600/225 | - | - | 301 | 301 | 8 | 225 | 834 |
BX800 | - | - | 401 | 401 | 8 | - | 810 |
BX800/450 | - | - | 401 | 401 | 8 | 450 | 1260 |
BX1200 | - | - | 601 | 601 | 8 | - | 1210 |
OMEGA 225/23MM | 53 | - | 401 | 401 | 8 | - | 865 |
PropertiesIncreased strength, reduced product weight and better surface finish.Orientated unidirectional layers are structurally more efficientQuicker to wet-out than woven fabricsAvailable in very heavy weights allowing faster deposition ratesBinderless CSM can be added to further cut down on lay-up time and increase speed of wet-out
Double Biax Fabrics