Digital Inclinometer Protractor Smart/Intelligent Digital Display measuring tools
High quality with very cheap price!
Function display:
On/offABS buttonHold buttonSlope buttonFeature:
High accuracy 0.05 degree at 0 degree & 45 degree & 90 degree, the rest <= 0.1 degreeSuper large LCD screenBeeper at 0, 45, 90 degreeHolding functionDisplay remains upright to view at all anglesAbsolute measurement and relative measurementLow power indicationBattery life is 20,000 hoursAuto power off in 5 minutesPrecision aluminum framework with four measuring surfaceTechnical data
Measuring range: 4*90 degree (0-360 degree)
Resolution: 0.05 degree
Accuracy: 0.05 degree at 0&90 degree, the rest <= 0.1 degree
Working current: 100uA
Working temperature: -5 degree ~ +50 degree
Power:2*AAA alkaline batteries
Battery life: more than 20,000 hours
Limited warranty
One year limited warranty
Calibration procedures:
When installing a new battery or press “HOLD” button more than 6 seconds, T”-1-“ icon is on the LCD, the unit is under the calibration state. Operate the following steps.
Put the unit on the flat surface, short press “ABS” button, “-1-” icon is blinking 6 seconds“-2-“ is on the LCDRotate the protractor end for endShort press “ABS” button, “-2-“ icon blinking 6 secondsThe protractor is on the absolute measuring mode, the angle is on LCD, calibration is finished.Note: after the calibration, it is in absolute measurement mode, the angle is relative to the horizontal level.
Absolute measurement mode
In the absolute measurement mode ( lcon “ABS” is on upper middle of LCD, put the unit on the surface, the angle will show on the LCD)
Relative measurement mode
Setting aero at any reference surface, get the relative angle offset to the previous aero setting surface as follows:
In absolute measurement mode ( lcon “ABS” is on upper middle of LCD), put the unit on the surface of 25 degreeShort press ON/OFF button, change to relative measurement. (“ABS” icon is not shown on LCD and 0.0 on the LCD)Put the unit on the surface offset to zero setting surface, the angle 35 degree is shown on the LCD.Trouble shooting
1. Problem: no display or ambiguous
Possible cause: low voltage or erratic installation of battery
Solution: reinstall battery or replace new battery
2.Problem: erratic display
Possible cause: internal error
Solution: recalibrate it
Digital Inclinometer Protractor Smart/Intelligent Digital Display measuring tools