LGD-60 laser scanning micrometer is non-contact laser scanning method to measure cable,wire,pipe and tube diameter,

Product Brief:

LGD-60 Laser scan micrometer is non-contact laser scanning method to measure big size cable,pipe and tube diameter, Metal rod object.

Product Principle of measurement:

The laser beam emitted from the semi-conductive laser “a” is deflected by the fast rotating octoangular prism “b” driven by the motor “c”. After scanning and passing the lens “d”, the beam becomes a beam of parallel light running through the measurement zone (gate). If the object to be measured “e” is located in the gate, it will block part of the parallel light. After the parallel light is transmitted through the focusing lens “f”, the blocked part will be transformed into a low level electric signal while the unblocked part will be transformed into a high level electric signal by the photoelectric tube “g”. The outer diameter of the tested object in the direction of the scanning light may be calculated from the scanning time of the low-level electric signal.

LGD-60 Specification:

Measuring range: 0.400~50.000 mmLinearity: 0.003 mmMeasuring Accuracy: 0.003±0.02%D mmDisplay resolution: 0.001 mmScanning speed: Single Axis 600 time/SNet Weight: 5.0 kg

LGD-60 Application:

Middle size tupe & pipe (less than 45mm)big size Power Cable,  Coaxial cable,Fiber optics cableMetal wire, plastic wire, tube & pipeTransparence and half transparence glass objectVarious work piece

Characteristic:

Adopt laser scanning technique, Wide measurement range.It has RS485 serial port, it can connect to PLC, Computer or DPM Seires displayer& controller.Product adopt high accuracy F(θ)Lens. If measuring object rock or shake, don’t influence measure result. Measure result is uninfluenced by impurity light and smog.LGD-60 has tolerance single output, it can connect alarm.

Product application

Diameter Measuring Device LGD-60