Mechanical Thermostat FZK 011 Available in F or C scale Change-over contact High switching capacity DIN rail mountable

Mechanical Thermostat FZK 011

Wide adjustment rangeAvailable in °F or °C scaleChange-over contactHigh switching capacityDIN rail mountableThe FZK 011 Thermostat is designed to control the air temperature inside of enclosures and control panels.  It can be used for enclosure heaters, cooling equipment (e.g. filter fans), or signal devices.An integrated resistor (RF) can be connected to increase accuracy when the FZK 011 is used with an enclosure heater1).

Technical Data

Switch temperature difference	4K (± 1.5K tolerance)*
Sensor element	thermostatic bimetal
Contact type	change-over snap-action contact
Contact resistance	< 10mOhm
Service life	> 100 000 cycles
Max. switching capacity, NC	250VAC, 10 (4) A
	DC 30W
Max. switching capacity, NO	250VAC, 5 (2) A
	DC 30W
EMC	acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection	4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²
Mounting	clip for 35mm DIN rail, EN50022
Casing	plastic according to UL94 V-0, light grey
Dimensions	67 x 50 x 38mm
Weight	approx. 0.10kg
Fitting position	variable
Operating/Storage temperature	-20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F)
Protection type	IP20
Approvals	-

*Connecting terminal "N" (RF heating resistor) causes the thermal feedback to work and so reduces the switch temperature difference to approx. 0.5K.