gradiometer, gradient meter 1 Measuring method: Accurate pointing/ direct reading 2 Measuring angle range: -90~+90 3 more ea

 gradiometer, gradient meter Digital incliometer / gradient meter SDC200

 

Features

1.) In-built solid sensor component,with features of        

compact structure,Light weight and high anti-vibration

2.) Capable of monitoring voltage of battery

3.) Multi-group data tested for each measured point,with   

function of self-calibration;

4.) Special rechargeable battery cartridge used;

5.) Output results can be save permanently with low cost of

consumables;

In comparison to traditional pointer, SDC200 has the following advantages:    

a) SDC200 adopted the  2-Axis inclinometer with high accuracy which successfully applied to defense devices. (Resolution up to0.01°)b) Optimum design of Downhole instrument structure,Cancelled the oscillating device, which cause an operation to be more easy,and save time, When measurement inclination probe reached to destination

Applications

1. Measuring the attitude parameters of petroleum deflected well engineering;

2. Measuring the bending of geological drilling;

3. Replacing singular shot imaging inclinometer;

4,Mainly used to monitor deep footing groove, side slope, groundsill, pier and so on foundation displacement during observed.

Technical Datas

SDC200Parameters                Value                                       Units

Measuring range of zenith angle	-90~+90	°
Measuring accuracy of zenith angle	≤0.05	°
Resolution	0.01	°
Measuring method	Accurate pointing/ direct reading
Measuring points	Arbitrarily
Power supply	AC 220V±10%	%
Frequency	50Hz±10%	Hz
Ground instrument working conditions	Temperature-10~+50	°C
Humidity	≤85%	%
Downhole instrument working conditions	0~85	°C
Pressure	≤25	MPa
Ground instrument size	280×310×115	mm
Weight	2.5	Kg
Downhole instrument size	Φ50×1350mm	%
weight	15	Kg