1. INTRODUCTION
Triple Track model is developed for using ISO Format card.
It is Manual Swipe Type Magnetic Card Reader with TTL terminal.
2.CONFIGURATIONS
The Configurations are as follows:
Model No. | Tracks | Color |
Triple Track model | three tracks | Black |
3.FEATURES
A. INTERFACE: TTL. Clock and data output.
B. Small compact size.
C. low power consumption.
D. design for reading low coercivity and high coercivity.
E.300 Oe --- 4000 Oe.magnetic cards.
F.Read Credit cards,bankcards,and idcards.
G. Cable Length
90mm* Customized connector are also available.
4.BASIC SPECIFICATION
A. DIMENSION :
Length -90mm
Width - 24mm
Height - 21mm
B. WEIGHT :
25g (Approx.) with cable
C. POWER SUPPLY :
Voltage: 3.3V---5 Volts DC
D. ENVIRONMENTAL REQUIREMENTS
i Operation : -10C ~ 55C, 20%~90% RH
ii Storage : -30C ~ 70C, 10%~95% RH
iiiHumidity: 0% to 95% RH non-condensing
E. OPERATION LOCUS :
Indoor use
F. SHOCK : 30G, 11ms
G. Case material: ABS plastic
H. Life of Head: 300,000 passes, minimum
I.READ speed range:10cm/sec---140cm/sec.(4ips---55ips)
5. SPECIFICATION
A. Card Specification
The cards which are used in Triple Track model should be complied with ISO 7810, 7811 and 7812.
Track Position | ISO 1 (IATA) | ISO 2 (ABA) | ISO 3 (MINTS) |
Recording Density | 210 BPI | 75 BPI | 210 BPI |
Recording Capacity | 79 Characters (7bits) | 40 Characters (5bits) | 107 Characters (5bits) |
Card Thickness | 0.76 mm ± 0.08 mm |
Card width: 0.010 to 0.050 inches 0(.254 to 1.27mm)
B. MAGNETIC READER
Formats: ISO 7811, AAMVA,ANSI,and CA DMV..(300---4000.Oe).
Swipe speed: 5 to 55 inches per second, bi-directional
Slot width: 0.055 inches (1.37mm)
6. TTL Interface
Pin No. | Cable Color | Signal Name | |
Triple Track model | |||
1 | Red | +5 V | |
2 | Black | Ground | |
3 | Orange | RDD2 | |
4 | Yellow | RCP2 | |
5 | Brown | CPD1+2+3 | |
6 | Green | RDD1 | |
7 | Blue | RCP1 | |
8 | Grey | RDD3 | |
9 | Purple | RCP3 |
TTL magnetic card reader