Ads by Google
Profibus DP
P/N: CI-PF22-S
Description:
This series is Profibus protocol fieldbus fiber optic repeaters, support PROFIBUS DP fieldbus, independent dual bus electrical interface 2 optical interfaces, supply redundancy dual bus structure optical fiber redundancy ring network function, offer redundancy dual networks system the fiber optic redundancy long distance transmission relay function with safe efficient.
[Summarize]
This series is Profibus protocol fieldbus fiber optic repeaters, support PROFIBUS DP fieldbus, independent dual bus electrical interface and 2 optical interfaces, supply redundancy dual bus structure and optical fiber redundancy ring network function, offer redundancy dual networks system the fiber optic redundancy long distance transmission and relay function with safe and efficient. Shenzhen Comark Technology Co., Ltd. is a professional industrial networking equipment supplier; equipments done adopt the latest technology with their own completed intellectual property rights, launched the products with the features of industry’s innovative
[Feature]
l Support logically independent dual Profibus DP; support the pre-communication rate in standard criterion.
l Support DIP switch manually set all the standard rates or rate adaptive.
l 1~2 channels Profibus DP electric port and 1~2 channel 155M fiber optic ports choose flexibly, support redundancy dual fiber optic ring networking topology.
l Longer than 20km, 155Mb/s, high speed optical interface can better support burst data long distance transmission reliably.
l 6 pcs of double colors LED status illustration light, optical fiber link and power error relay alarm output.
l Electric interface 4000V thunder-proof, 1.5A overcurrent protection, 600W surge protection. Industrial design, EMC test certificate.
l DC9-36V wide temperature redundancy dual power, reverse connection protection.
l IP30 protection grade, wave pattern aluminum enhance case, adopt standard industrial 35mm Din Rail installation.
[Specifications]
Electrical Interface:
Ø 9-pin Sub_D, socket connector, definition of pins conform to Profibus DP protocol standard.
Ø Support Profibus DP Standard.
Ø Communication Rates: 9.6kBit/s,19.2 kBit/s,45.45kBit/s,93.75k kBit/s,187.5kBit/s,500kBit/s,1.5MBit/s,6MBit/s and 12MBit/s.
Ø Rate Setting: Automatic identification or DIP Switch settings.
Ø Signal Delay (electrical interface): ≤11Bit
Ø Have the protection function of 4000V anti-lightning,1.5A over-current and 600W surge-proof;
Ø Terminal Resistance: the equipment without terminal resistance, please use the external one when necessary.
Optical Interface:
Ø Wave Length: multi-mode 850nm,1310 nm; single-mode 1310 nm,1550nm.
Ø Transmission Fiber: multi-mode 50/125 um,62.5/125 um,100/140um; single-mode 8.3/125 um,9/125um,10/125um.
Ø Transmission Distance: multi-mode 2km, single-mode 20km, longer distance optional.
Ø Fiber Interface Type: SC,FC, ST optional, SC standard.
Ø The optical line BER: <10-9
Ø Signal Delay (optical interface): ≤1.6us/node
Power and Protection:
Ø Power: dual power redundancy input, DC(9-36)V, typical DC24V, power consumption less than 4W, has DC1500V voltage isolation and reverse protection, industrial terminal interface.
Ø Relay alarm output: optical fiber link failure and power error alarm output, maximum capacity of contacts: DC48V/1A, industrial terminal interface.
Mechanical Properties:
Ø Dimensions: 132mm×105mm×52mm
Ø Casing: IP30 protection grade, wave pattern aluminum enhanced casing.
Ø Installation: 35mmDIN rail installation.
Ø Net weight: 800g
Environmental:
Ø Operating Temperature: -10-70°C (-40~+85°C optional)
Ø Ambient Relative Humidity: ≤90% (non-condensing)
Ø Storage Temperature: -40~80°C
[Order information]
| P/N | Series | Description | Unite |
| Ci-pf11 | 1 electrical port, 1 optical port | 1 channel standard Profibus DP port, 1 channel optical port, DIP switch set rate and rate adaptive optional, use for point to point topology, multi mode fiber 0~2Km, single mode fiber 0~20Km, longer distance optional, optical interface type ST/SC/FC optional. | pcs |
| Ci-pf12 | 1 electrical port, 2 optical ports | 1 channel standard Profibus DP port, 2 channel optical ports, DIP switch set rate and rate adaptive optional, use for daisy chain, star, ring and other network topologies, multi mode fiber 0~2Km, single mode fiber 0~20Km, longer distance optional, optical interface type ST/SC/FC optional. | pcs |
| Ci-pf21 | 2 electrical ports, 1 optical port | 2 channels independent Profibus DP ports, 1 channel optical port, DIP switch set rate and rate adaptive optional, use for point to point topology, multi mode fiber 0~2Km, single mode fiber 0~20Km, longer distance optional, optical interface type ST/SC/FC optional. | pcs |
| Ci-pf22 | 2 electrical ports, 2 optical ports | 2 channels independent Profibus DP ports, 2 channel optical ports, DIP switch set rate and rate adaptive optional, use for daisy chain, star, ring and other network topologies, multi mode fiber 0~2Km, single mode fiber 0~20Km, longer distance optional, optical interface type ST/SC/FC optional. | pcs |
profibus DP optical link module with dual DP and dual optical port for siemens plc OLM application ci-pf22-s