1. The heating temperature is high. 2. Heat transfer effect is good. 3. Shape according to user requirement . 4. Long uesing.

1.Brief

Copper casting (aluminum) electric heater is will electric heating element bending forming casting in specific to the shape of the copper.

2.Features:

1). The heating temperature is high, Aluminum electric heater is the highest working temperature is up to 400 °C; Copper casting electric heater is the highest working temperature is up to 650 °C;

2), heat transfer effect is good, the non-ferrous metal aluminium or copper as media, copper coefficient of thermal conductivity of 0.94 W/m.K, The aluminum the coefficient of thermal conductivity of 0.53 W/m.K;

3), the heating temperature even, the wall installation forms, and be heating equipment interface after car processing, effective and equipment close together joint;

4), long service life, electric heating element fever length in all cast in casting, no direct contact with the media;

5), mechanical performance is strong, made of copper (aluminum)electric heater is forming integral casting, with good mechanical properties;

6).Size, the biggest than 6 m in diameter, maximum weight: aluminum electric heater less than 1 T; Copper casting electric heater less than 3 T

7). shape according to user requirement of process customization, non-standard design, such as round, hemicycle, right Angle shape and arbitrary shape several combination;

8), maximum thermal load: aluminum electric heater for 6 W/C square, generally take 3 ~ 4 W/C square; Copper casting electric heater for 8 W/C square, generally take 3.5 ~ 4.5 W/C square

9), explosion-proof level: Exd  level two BT4;

10), electrical control as shown in the electric control system and solutions

3.Appliance

Can be widely used in plastic machinery, die head, cable machinery, chemical industry, rubber, oil, and other equipment