CuBe2Pb--UNS.C17300 Leaded Beryllium Copper Alloy Form:Bar,Wire Leading manufacturer,supplier competitive price

CuBe2Pb--UNS.C17300 Leaded Beryllium Copper Alloy

Cube2Pb--C17300 (CDA 173) The Leaded Beryllium Copper is identical to a version of lead-containing alloy C17200 and achieves the same exceptional strength after hardening. C17300 rods contain a small amount of lead to provide an alloy tailored for automatic machining operations and the Lead promotes formation of finely divided chips thus extending cutting tool life.

Typical Application for C17300 Leaded Beryllium Copper Alloys:

Electrical Industry: Switch Parts, Relay parts, Electrical Connectors, Fuse Clips, Contact Bridges, Electrical Motor Components, Navigational Instruments, Electrical Switch and Relay Blades.Fasteners:Washers, Fasteners, Lock Washers, Retaining Rings, Roll Pins, Screws, BoltsIndustrial:Bushings, Non-Sparking Safety Tools, Shafts, Pumps, Springs, Welding Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts, Valves, Bourdon Tubes, Bellows, Electrochemical Springs, Flexible Metal Hose

Available Sizes:Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):Round bars, Round wires, Round tubeFlat bars, Square bars, Rectangular bars, Hexagon bars, PlatesCustom shapes are available upon request

Chemical Composition:

Be: 1.85-2.10%Co+Ni: 0.20% Min.Co+Ni+Fe: 0.60% Max.Lead: 0.20-0.60%Cu: BalanceNote: Copper plus additions equal 99.5% minimum.

Typical Physical Properties:

Density (g/cm3): 8.36Density before age hardening (g/cm3): 8.25Elastic Modulus (kg/mm2 (103)): 13.40Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6Thermal Conductivity (cal/(cm-s-°C)): 0.25Melting Range (°C): 870-980

Note:1). the units are based upon Metric.2). the typical physical properties apply to age hardened products.

International Specification:

Rods/Bars/Tubes:ASTM B196, QQ-C-530Wires:ASTM B197, QQ-C-530Plates:ASTM B194

European Standards: DIN 2.1248, CW102C to EN

Note:ASTM:American Society for Testing and MaterialsQQ: Federal SpecificationNote: Unless otherwise specified, material will be produced to ASTM.

Mechanical Properties:The Mechanical Properties will be available on request from customers.

Most Commonly Temper Used:

Rods/Bars/Tubes: A(TB00),H(TD04),AT(TF00),HT(TH04)Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)Plates: A(TB00),H(TD04),AT(TF00),HT(TH04)

CuBe2Pb--UNS.C17300 Leaded Beryllium Copper Alloy