Roof and Ceiling batten machine(also called top hat purlin machine) meet Taiwan quality standard and exported 60 countries.

Roof and Ceiling batten machine  (One year warranty)

Product Description:

1) The product produced by these series batten shaped purlin roll forming machine is used for batten shaped purlin in building. This product will be used for hold ceiling and wall panel.

2) It is with the advantage of lower cost, soon fixture, This series product is common used in different ranges.

3) The width and height are adjustable.

Roof and Ceiling batten machine   production processing:

feeder→molding machines→automatic control system for hydraulic cutting→holder→PLC computer control system (from Taiwan)

 

Decoiler:

1,Loading capacity,2tons

2,The inside diameter fits for coil, 480~510mm

3,The biggest width capacity,420mm

 

Roof and Ceiling batten machine composition:

1.Roll forming stations:17 stations for forming+3stations for straighening&leveling

2.Roller material, 45# mould steel

3.The hardness of roller will be HRC=58-60º after heating treatment

4.The rollers are coated with hard chrome

5. Accurate grinding process, roller/axis are processed by grinder

6.Mortor power: 7.5kw

7.Transmission,chain and gear drive with hardened treatment

8.Feeding material thickness: 0.6-1.2mm

9.Specification,as detailed drawing

10.Production efficiency:12m-15m/min

 

Hydraulic cutting

1.Automatic hydraulic control cutting system as setting 

2.Hydraulic cutting system, adopt 2.2kw motor

3.Cutting blade material, Cr12 mould steel,with heat treatment, accurate grinded,  wire-electrode cutting accurate processing     

4.Treatment for cutting blade, the hardness will be HRC60-62°C after heat treatment

 

Electronic control system of  Roof and Ceiling batten machine

Control system,  PLC computer control system from Taiwan or Japan

 We offer customized sizes, it is helpful that if you can send us the drawing.