Ads by Google
1.Introduction:
The main equipment that SLF sandwich panel production line make is used to produce sandwich panel. It's a new building material which has the features as stable, light, solidity and beautiful appearance. The application of sandwich panels in various usage of large-scale house like supermarket, workshop, warehouse is convenient and fast in building. Then also can be used to construct refrigerator, clearing room, etc.
2.Feature
This line adopts advanced technique,which integrates gas ,electricity and machinery ,and this line is the special equipment for processing colorrd steel sandwich panel .its working speed can be adjusted by frequency converter,and it can process sandwich panel at one time .
The line for sandwich panel is made up of a sandwich panel laminating system and roll forming machine .Both the laminating system and roll forming machine can work independently .The roll forming machine of the line consists of feeding equipment .roll forming section.while the laminating system is made up of such equipment as decoiler ,feeding ,squeezing ,heating ,laminating ,edge rolling ,edge turn-over ,groove-making ,edge pruning ,pneumatic device ,automatic cutting and control system .The whole machine possesses advanced working crafts .
The sandwich panels of this line are widely used as the roof and wall of factory ,warehouse ,garage ,exhibition center, cinema ,theatre ,gymnasium,civil construction ,stadium ,cold storage ,etc .
1)Corrugated Sandwich Panels can be produced directly, without the shortcoming that traditional corrugated sandwich panels have to be laminated manually after the forming of corrugated sheet.
2)Both the roll forming machine and the laminating system can work independently.
3)Beautiful appearance, Low noise, High efficiency
4)The line employs advanced PLC and sets the panel length and cuts the panel automatically.
3.Main technical parameter:
Type | HD Sandwish Panel Roll Forming Machine |
Installation dimension | 36m*3.6m*2.4m |
Forming speed | 0-5m/min |
Main motor power | 32kw |
Total weight | about 10t |
Control system | PLC control system full automatic control |
Voltage | 380 v/5 phase |
The thickness of upper steel plate | 0.3-0.8mm |
The feeding width of upper steel plate | 1000/1200/1250mm |
The thickness of lower steel plate | 0.3-0.8mm |
The feeding width of lower steel plate | 1000/1200/1250mm |
The thickness | 47-247mm |
The width of stocket board | 950/1150mm |
The width of H board | 1000/1200mm |
Material | EPS |
All technical parameters can be changed, according to user's need.
4.Process of line:
Decoiler-active feeding-coil strip leveing -roll forming -measure length-cut to length-product packing
5.Components of line:
No. | Name | Unit | Qty |
1 | Decoiler | set | 1 |
2 | Main machine for roll forming | set | 1 |
3 | Automatic control system | set | 1 |
4 | Hydraulic system | set | 1 |
5 | Automatic cutting | set | 1 |
6 | Output table(Products receiving tables) | set | 1 |
We also can design and manufacture as your requiremet.
PU&EPS Sandwish Panel Roll Forming Machine